Adobe Lightroom 4 Tutorial


←back to Lightroom Tutorial Part 1


Set White Balance in Lightroom 4

The first thing you want to do is set the white balance. This is especially important if you’re not shooting in daylight because most lightbulbs skew the white balance in one direction or another. In this example, I deliberately messed up the white balance while taking the photo to show you just how effective this can be.

Lightroom 4 White Balance Tutorial

Start by selecting the eye dropper tool and clicking on an area of the image that’s supposed to be a neutral grey. It’s ideal if you took a test shot with a chromatically neutral grey card, but even if you haven’t I find that most shots have something in it that will work to set the white balance (the rim of a white plate, the edge of a pan, a white counter top, etc).

Whitebalance in Lightroom 4 Set

Once you have the white balance roughly set with the eye dropper (or if you’re shot doesn’t have anything chromatically neutral in it), you can go and fine tune your white balance using the Temp and Tint sliders. The Temp slider makes a photo warmer or cooler by shifting the balance yellow(right) or blue (left). The Tint slider will shift the color towards magenta(right) or green(left). It takes a little experimentation to get used to these controls, but try starting with small adjustments. Keep in mind that the human eye sees colors relative to other colors and not as absolutes, so if you stare at a photo that’s too warm for long enough, it will start to look normal. That’s why I’ll usually develop my photos in 2 sessions. The first to get everything looking good, and then a second session to double check that they still look good after doing something else for a while.

Adjust Exposure in Lightroom 4

Lightroom 4 Histogram Tutorial

The next six sliders in the Tone section all control the exposure of your image. Before we get into the specific controls for exposure, let’s take a look at the histogram at the top right of the develop window. The histogram is a visual representation of the different tonal regions in your photo. The graph shows you how much of your image is in each tonal region and is a great way to quickly see what tones in your photo are problematic.

The right and left borders of the histogram represents the white point and black point, and since nothing can be whiter than white or blacker than black, any part of the image that bleeds over these boundaries will start losing detail. In most cases (assuming you have a photo with both light and dark areas), you want the graph to span as much of the spectrum as possible, with the peak towards the middle, and without having it bleed off the left or right edges. If you are shooting a very light image (e.g. white plate on white background), the peak will be more towards the right. If you are shooting a dark image (e.g. black plate on black background), the peak will be more towards the left.

Lightroom 4 Exposure Tutorial

The Exposure slider gives you broad control of the exposure of your image, allowing you to shift your whole image brighter or darker. In the example, the photo was under-exposed, so I moved the slider to the right to increase the exposure. Likewise, moving the slider left will decrease the exposure for a photo that’s been over-exposed. Notice how the histogram shifts from peaking on the left to peaking in the middle as the exposure is corrected.

The goal with the Exposure slider is to get the mid-tones of the photo where they should be: in most cases in the middle of the histogram. This may cause problems with the highlights and shadows, but we can fix that with another slider, so don’t worry too much about those. For instance, with this photo, getting the mid-tones correct comes at the expense of highlights that are over exposed, but we’ll go back and fix this later.

Adobe Lightroom 4 Contrast Tutorial

Once the exposure of the mid-tones looks good to you, you want to adjust the contrast. Moving the contrast slider to the right makes both the light areas of the image lighter and the dark areas of the image darker. In the histogram, you’ll see your graph spread to the left and right as you increase the contrast. Remember, in most cases you want the graph to span the spectrum from left to right without bleeding over the edge. If you find that one side bleeds over the edge before you can get the other side up against the edge, don’t worry about it too much as you’ll be able to reign in either end of the spectrum in a little bit.

Lightroom 4 Clarity Tutorial

While it’s not the next slider in the develop pane, I usually move onto the clarity slider at this point as both the contrast and clarity sliders effect the contrast of the image. While the contrast slider is “static” in that it equally effects the contrast of both light and dark areas of the image, the clarity slider is “adaptive” effecting different tones in the image to differing degrees. The best way to see the difference is to play around with both sliders. I use both sliders when processing my photos but I tend to use the clarity slider sparingly as the effect can quickly look artificial. It will however give your photos and HDR look if that’s what you’re going for.

The next four sliders Highlights, Shadows, Whites, and Blacks allow you to fine tune specific tonal areas of your photo. In the previous few steps, I told you to focus on getting the mid-tones right. But getting the mid-tones right, usually comes at the expense of blowing out highlights or losing detail in the shadows. Thats where these four sliders come into play.

Lightroom 4 Tone Sliders

To show you how these four sliders correspond to different parts of the tonal range, I’ve labeled the areas in the histogram above. Blacks and Whites effect the very darkest and lightest parts of the image, while Shadows and Highlights effect a broader swath of the dark and bright areas of the photo. If you ever get confused about which slider effects what, just mouse over the slider, and Lightroom will highlight the portion of the histogram that the slider effects.

I usually start by adjusting the Whites and Blacks sliders as they effect the upper and lower bounds of your tonal range and will allow you to quickly fix any spillage off the left or right sides of your histogram. Just look at the histogram and reign in bright areas or dark areas of your photo that bleed over the edge of the histrogram by moving either the Whites(right side of histogram) or Blacks(left side of histogram) slider. Once they look good, you can go in and further fine tune the light and dark areas of your photo using the Highlights and Shadows sliders.

Adobe Lightroom 4 Shadows and Whites Tutorial

In the example photo, the histogram isn’t bleeding off the edge, so there’s no need to fiddle with either one. Instead, I move onto the Highlights and Shadows slider. By moving the Highlights slider to the left a bit, it takes the exposure of the brighter areas of the photo down, without effecting the white-point. I also moved the Shadows slider to the left to darken the shadows a bit and produce more definition in the photo, without bleeding past the black-point and underexposing the darker areas.

Adjust Saturation in Lightroom 4

Adobe Lightroom 4 Vibrance Tutorial

The last two sliders, Vibrance and Saturation, both effect the saturation of colors in your photo. Used in moderation, boosting the saturation of a photo is a great way to make food look more appetizing by intensifying the colors.

The Vibrance slider is adaptive, so if you move the slider to the right, it figures out which colors in your photo are least saturated and then increases the saturation of those colors. Moving it to the left figures out which colors are most saturated and decreased their saturation. This allows you to give your photos a natural boost in saturation without clipping any of the colors.

Buy Adobe Lightroom 4

The Saturation slider on the other hand is static and increases the saturation of every color in your photo equally. That’s why it’s best to stick with the Vibrance slider to make saturation adjustments(unless you deliberately want to oversaturate your photo for artistic reasons).

The colors in our example are already pretty saturated and overdoing it will make the mango look like it’s glowing, so let’s have a look at the before and after based on the changes that we’ve made.

Before and After Lightroom

Quite a difference huh?

continue to Lightroom Tutorial Part 3 →

  • Lizzie Mabbott

    Brilliant! I always used light room to ‘auto white balance’, ‘auto tone’, crop and then export but this has really enlightened me. Thanks!

  • joannova

    Hi Marc, Thanks – this is a fine and thoughtful piece of work. Your explanations and terminology were so easy to follow. I hope you’ll do more of these.

  • http://urbanswankblog.com/ Urban Swank

    This is great information! Thanks for taking my dark food photos to the next level!

  • http://twitter.com/foodnouveau Marie Asselin

    I’m a graphic designer so I know Photoshop very well. It’s confortable for me to use it to edit my pictures, but I’ve known for long that Lightroom is better for handling pictures, both for results and productivity sakes. I’ve been wanting to jump to Lightroom for almost two years, but I’ve always too busy, or lazy to do so! Reading your tutorial, I feel like I just have to, now! Thanks for sharing these very valuable tips.

  • http://www.ouichefnetwork.com Oui, Chef

    Even though I’m an Aperture user, most of these controls are the same so I will find this tutorial very helpful as I try to bring my blog shots to the next level. Thanks so much for sharing your wisdom on the subject. – S

  • Christina Johnson

    I adore Lightroom. I have been using Photoshop for years but it wasn’t until I started using Lightroom that it became reasonable to start actually doing mild editing all of the photos I take so I can really choose the best.

  • http://twitter.com/operagirlcooks Coco

    This is great! I loved your presentation at FoodBuzz last year — it’s great to have a refresher! Will you be coming to SF this weekend?

    • http://norecipes.com Marc Matsumoto

      I’ve been meaning to write this since my presentation last year. Better late than never right:-) I won’t be at Foodbuzz fest this year unfortunately.

      • http://twitter.com/operagirlcooks Coco

        Yes, definitely better late than never! Sorry we missed you at FoodBuzz this year — it was a good time. Lots of new faces. Hope to meet up again sometime when you’re in SF!

  • http://twitter.com/darrentran87 Darren Tran

    awesome… thanks!

  • Nb

    Great work!! I know so much about LR now

  • http://twitter.com/littleredkitchn Susan P.

    Thank you so much! I really never understood how to work the histogram, and now I do! Going to try this out with the next batch of photos I have to edit.

  • David

    Great tutorial, great pictures! Thanks for sharing.

  • Pingback: Looks good enough to eat…. | Still and All

  • Christoph

    Wow, great tutorial! I’ve never shot food, but you nicely described which slider in Lightroom does what in a general sense so that I can apply it to my landscape photos. Thank you a lot for giving this well-written introduction!

  • Dyane

    This is great – now I just need to get my hands on this stuff! My mom is a great photographer but we live 1,000 miles apart.

    My blog is dplumly.wordpress.com

  • Dima Al Sharif

    Thank you for this tutorial, very useful with lots of insight. I am no photographer, and currently working on improving my photography for my blog, this is exactly what I need :)

  • http://twitter.com/thewickednoodle the wicked noodle

    I’m only through Tutorial Part 1 but I’m already so jazzed that I found this post. Thanks so much for this, Marc! I’ve been an Elements user for some time but won Lightroom about six months ago (and am recently a new Mac user) and I’ve been putting off learning it. I started watching the videos but who has the time? I really wanted something from a food blogger’s perspective and I happened to come upon this post on a fluke. Happy dance!

    • http://twitter.com/thewickednoodle the wicked noodle

      Hi Marc,
      I’m wondering if you sharpen your photos in Lightroom? I’ve always been under the impression that this is a must for photos taken with a DSLR. Can you provide any guidance for that in relation to Lightroom?

      Thanks,

      Kristy

      • http://norecipes.com Marc Matsumoto

        Good question. Sharper isn’t always better as it reveals grain and compression artifacts. It can also make highlights on liquids look harsh. Personally I don’t mind food photos being a little soft. But when used in moderation it can also reveal detail in the texture of your food as well. When printing I usually apply some sharpening, but for web purposes (72 DPI) I personally don’t think it’s necessary.

      • http://norecipes.com Marc Matsumoto

        Also, your lens and camera setup will effect your need to sharpen or not. Cheaper lenses tend to be softer, especially around the edges, so sharpening in software can become necessary.

        • http://twitter.com/thewickednoodle the wicked noodle

          Thanks Marc, good to know! I recently upgraded to the Canon 7d as well as the 24-105 lens – it would be really nice not to have to be so concerned with sharpening. I noticed yesterday that Lightroom offers the option to “sharpen for the web” when saving photos so I may try that in place of doing anything manually. In any case, I appreciate your response and feedback. Cheers!

      • Mike Sweeney

        When I switched from my crop sensor D300 which is not a slug by any stretch to my D700, my need for sharpening went WAY down. I used to use between 40-65 on sharpening with the D300. The 20s is typical now on the D700.. sometimes more but not often. This assumes web prints. If I’m printing to paper, then they get sharpened much more than you might think as paper tends to smear the image a bit.

  • Mike Sweeney

    Really nice tutorial and the clear screen shots really makes it. Thanks for sharing

  • Christabel

    Thank you for this helpful tutorial…I have just started a food blog, and I am looking to improve the quality of my pictures w/post-processing. This is a comprehensive tutorial with pictures that helps me visually understand the purpose of white balance, hue, saturation etc.

  • Mara @ What’s for Dinner?

    This has been beyond helpful! I’ve wondered about the nuances in Lightroom 4 and you made it easy to understand. Thank you!!!

  • http://www.fashionedible.com/ FashionEdible

    This is an amazing article! Not only is it good for food bloggers, but I think any blogger can really benefit from it. Thanks so much!

  • Pingback: Bites for Growing Your Blog: Food Photography Basics.

  • Pingback: Why You NEED Lightroom 4, Best Tutorials « GoodNCrazy

  • Pingback: Adobe Lightroom Tutorial (a.k.a. my dirty little secret)

  • Pingback: Giveaway: Adobe Lightroom 4

  • Pingback: Food Bloggers: Everything You Need to Know | Recipe Girl

  • KB

    This has been extremely helpful. Thank you.

  • http://www.facebook.com/popoymaster Wendell Principe

    hi, i followed your folder structure, just want to check how your file naming convention? thanks.

    • http://norecipes.com Marc Matsumoto

      I just leave the file names as they came off the camera sine the folder structure relays enough data for me, but you could certainly name the files as well.

  • Pingback: Photography on Simply Recipes | Simply Recipes

  • Ingrid

    Thank you!
    ~ingrid

Welcome!

I'm Marc, and I want to teach you some basic techniques and give you the confidence and inspiration so that you can cook without recipes too!

Ramp Pesto Pasta
Wallpaper Wednesday: Statue of Liberty
Soup Curry
Triple Black Garlic Noodles
Apple pork pie with caramelized onion crust
Asian Noodle Salad with Fried Halloumi
Strawberry Rhubarb Parmesan Crisp